A robust cartridge pre-mounted in a headshell
The Audio-Technica VM95C/H pre-mounts the VM95C cartridge in a lightweight aluminum AT-HS6BK universal headshell. The cartridge features a 0.6 mil bonded conical diamond stylus that reads record grooves accurately. The headshell is made to fit a standard 4-pin, 1/2-inch mount for compatibility with a wide range of turntables.
AT-VM95C cartridge:
- dual moving magnet design for excellent stereo separation
- 0.6 mil bonded conical diamond stylus
- aluminum cantilever
- frequency response 20-20,000 Hz
- stereo separation: 23 dB
- output voltage: 4.0 mV
- channel balance: 2.5 dB
- tracking force: 2 grams
- load impedance: 47k ohms
- load capacitance: 100-200 pF
- can be used to play modern vinyl 'microgroove' 78rpm records (not recommended for older shellac recordings)
- cartridge weight: 6.1 grams
AT-HS6BK headshell:
- lightweight aluminum 1/2"-mount headshell
- compatible with 4-pin cartridges
- finger lift is positioned near the front of headshell to enable precise placement of stylus
- MFR # AT-VM95C/H
- Item # 057VM95CH
